RADIUS Attributes Reference
150
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
26-6527-11 Alc-Subsc-ID-
Str
A mandatory attribute used in Access-Accept for AA subscriber creation (as in
ESM host creation) or application-profile change (CoA) and for AA-transit
subscriber creation (CoA), removal (Disconnect) or audit (CoA). Attribute
values longer than the allowed string value are treated as setup failures.
26-6527-45 Alc-App-Prof-Str Application Assurance for residential, business or transit-AA subscribers is
enabled through the assignment of an application profile as part of either
enhanced subscriber management or static configuration. [26-6527-45] Alc-
App-Prof-Str is a string that maps (configure subscriber-mgmt sub-ident-
policy sub-ident-policy-name app-profile-map) to such an application profile
(configure application-assurance group aa-group-id:partition-id policy
app-profile app-profile-name). This attribute is used in access-accept (to
assign an application profile during esm host creation) and CoA (to change the
application profile of a AA-subscriber or to create transit AA-subscriber).
Strings longer than the allowed maximum are treated as setup failures.
Unreferenced strings (strings not mapping to an application profile) will silently
trigger a fallback to preconfigured default values if allowed. If no default value
is preconfigured, the subscriber's application profile is silently disabled for esm
AA-subscriber; in case of a transit AA-subscriber creation the CoA will be
rejected. The change of an application profile to one configured under a
different group/partition or the modification of the application profile of a static
AA-subscriber is not allowed and will be treated as setup failures.
26-6527-
130
Alc-AA-Transit-
IP
Used to create (CoA), modify (CoA), delete (disconnect) or audit (CoA) an
Application Assurance transit-ipv4/v6-subscriber for business AA deployments
and allows reporting and policy enforcement at IP address or prefix level within
the parent SAP or spoke-SDP. Mandatory attributes to create(c), modify(m),
delete(d) or audit(a) an AA-transit-ip-subscriber are: [8] Framed-IP-Address (c/
m/d/a) or [97] Framed-IPv6-Prefix(c/m/d/a), [87] NAS-Port-Id(c/m/d/a), [26-
6527-11] Alc-Subsc-ID-Str(c/m/d/a), [26-6527-45] Alc-App-Prof-Str(c/m/a) and
[26-6527-130] Alc-AA-Transit-IP(c/m/d/a). The value of [26-6527-130] Alc-AA-
Transit-IP must be an Integer, the value 1 (host) is used for host creation, 2
(audit-start) and 3 (audit-end) are used for the audit.
26-6527-
182
Alc-AA-Sub-
Http-Url-Param
Optional text string used to customize the URL used for HTTP In-Browser
Notification and automatically appended at the end of the notification script
URL as an argument. This text string can also be configured in the http-redirect
URL policy using macro substitution.
The VSA string typically contains one or more argument names and values;
there is no limit in the number of arguments besides the maximum length of the
VSA. Each new argument must be preceded by “&” so as to be understood
properly by a web server, the format for the Alc-AA-Sub-Http-Url-Param string
must be for instance: "&arg1=value1" or "&arg1=value1&
arg2=value2"
This VSA string can be overwritten through CoA.
Table 51 Application Assurance (Description) (Continued)
Attribute
ID
Attribute Name Description
To Next Page
Loading...
