RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 177
26-3561-141 Maximum-
Interleaving-Delay-
Downstream
The subscriber's maximum one-way downstream interleaving delay in
milliseconds, as configured by the operator and maps to values
received during PPPoE discovery (tag 0x0105) or DHCP (opt-82).
Attribute is included/excluded based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy name include-
radius-attribute access-loop-options.
26-3561-142 Actual-Interleaving-
Delay-Downstream
The subscriber's actual one-way downstream interleaving delay in
milliseconds and maps to values received during PPPoE discovery (tag
0x0105) or DHCP (opt-82). Attribute is included/excluded based on
configure subscriber-mgmt authentication-policy/radius-
accounting-policy name include-radius-attribute access-loop-
options.
26-3561-144 Access-Loop-
Encapsulation
The last mile encapsulation used by the subscriber on the DSL access
loop and maps to values received during PPPoE discovery Tags (tag
0x0105) or DHCP Tags (opt-82). Attribute is included/excluded in
RADIUS/Accounting-Request based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy name include-
radius-attribute access-loop-options. Last mile encapsulation
information can be used to adjust automatically the egress aggregate
rate for this subscriber. Preconfigured encapsulation types are used if
PPP/IPoE access loop information (tags) is not available (configure
subscriber-mgmt sub-profile subscriber-profile-name egress encap-
offset type type or configure subscriber-mgmt local-user-db local-
user-db-name ppp host host-name access-loop-encapsulation
encap-offset type type). [26-6527-133] Alc-Access-Loop-Encap-Offset
when returned in Access-Accept is taken into account (overrules
received tags and preconfigured encapsulation types) for ALE adjust
(last mile aware shaping) but is not reflected in access-loop-options
send to RADIUS. Alc-Access-Loop-Encap from ANCP are currently not
taken into account for ALE adjust.
26-3561-254 IWF-Session The presence of this Attribute indicates that the IWF has been
performed with respect to the subscriber's session. IWF is utilized to
enable the carriage of PPP over ATM (PPPoA) traffic over PPPoE. The
Access Node inserts the PPPoE Tag 0x0105, vendor-id 0x0de9 with
sub-option code 0xFE, length field is set to 0x00 into the PPPoE
Discovery packets when it is performing an IWF functionality. Attribute
is included/excluded based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy name include-
radius-attribute access-loop-options.
Table 62 Enhanced Subscriber Management Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
