RADIUS Attributes Reference
198
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
26-6527-199 Alc-IPv6-Acct-
Output-Gigawords
Indicates how many times (one or more) the [26-6527-198] Alc-IPv6-
Acct-Output-Octets counter has wrapped around 2^32 in the course of
delivering this service. The attribute is not sent when its value equals
zero.
Included when IPv6 aggregated accounting attributes are configured.
(configure subscriber-mgmt radius-accounting-policy name
include-radius-attribute v6-aggregate-stats).
26-6527-206 Alc-Wlan-SSID-
VLAN
On a WLAN-GW group interface this attribute indicates the UE VLAN
tag inside of the tunnel. This VLAN is usually used to differentiate
between SSIDs. If no VLAN is present or the host is not active on a
wlan-gw-group interface this attribute is not sent.
(configure subscriber-mgmt radius-accounting-policy name
include- radius-attribute wifi-ssid-vlan).
26-6527-226 Alc-Error-Code The [26-6527-226] Alc-Error-Code and [26-6527-227] Alc-Error-
Message attributes specify the reason why a subscriber session has
ended. Each numeric Alc-Error-Code corresponds with a human
readable Alc-Error-Message string.
An overview of the Error Codes and their mapping to Termination
Causes can be displayed with: tools dump aaa radius-acct-
terminate-cause
Included with following CLI: configure subscriber-mgmt radius-
accounting-policy name include-radius-attribute alc-error-code
26-6527-227 Alc-Error-Message The [26-6527-226] Alc-Error-Code and [26-6527-227] Alc-Error-
Message attributes specify the reason why a subscriber session has
ended. Each numeric Alc-Error-Code corresponds with a human
readable Alc-Error-Message string.
An overview of the Error Codes and their mapping to Termination
Causes can be displayed with: tools dump aaa radius-acct-
terminate-cause
Included with following CLI: configure subscriber-mgmt radius-
accounting-policy name include-radius-attribute alc-error-code
26-6527-228 Alc-Trigger-Acct-
Interim
This attribute, when received in a CoA message, triggers an accounting
interim update message for accounting modes that have interim-
updates enabled. The Alc-Trigger-Acct-Interim attribute with free
formatted string value is echoed in the CoA triggered accounting interim
update message. The [26-6527-163] Alc-Acct-Triggered- Reason
attribute in the interim update is set to 18 (CoA-Triggered).
Table 62 Enhanced Subscriber Management Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
