RADIUS Attributes Reference
22
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
26-3561-135 Maximum-Data-
Rate-Upstream
The subscriber's maximum upstream data rate (coded in bits per second),
as configured by the operator and maps to values received during PPPoE
discovery (tag 0x0105) or DHCP (opt-82). Attribute is included/excluded
based on configure subscriber-mgmt authentication-policy/radius-
accounting-policy name include-radius-attribute access-loop-
options.
26-3561-136 Maximum-Data-
Rate-
Downstream
The subscriber's maximum downstream data rate (coded in bits per
second), as configured by the operator and maps to values received
during PPPoE discovery (tag 0x0105) or DHCP (opt-82). Attribute is
included/excluded based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy name include-
radius-attribute access-loop-options.
26-3561-137 Minimum-Data-
Rate-Upstream-
Low-Power
The subscriber's minimum upstream data rate (coded in bits per second)
in low power state, as configured by the operator and maps to values
received during PPPoE discovery (tag 0x0105) or DHCP (opt-82).
Attribute is included/excluded based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy name include-
radius-attribute access-loop-options.
26-3561-138 Minimum-Data-
Rate-
Downstream-
Low-Power
The subscriber's minimum downstream data rate (coded in bits per
second) in low power state, as configured by the operator and maps to
values received during PPPoE discovery (tag 0x0105) or DHCP (opt-82).
Attribute is included/excluded based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy name include-
radius-attribute access-loop-options.
26-3561-139 Maximum-
Interleaving-
Delay-Upstream
The subscriber's maximum one-way upstream interleaving delay in
milliseconds, as configured by the operator and maps to values received
during PPPoE discovery (tag 0x0105) or DHCP (opt-82). Attribute is
included/excluded based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy name include-
radius-attribute access-loop-options.
26-3561-140 Actual-
Interleaving-
Delay-Upstream
The subscriber's actual one-way upstream interleaving delay in
milliseconds and maps to values received during PPPoE discovery (tag
0x0105) or DHCP (opt-82). Attribute is included/excluded based on
configure subscriber-mgmt authentication-policy/radius-
accounting-policy name include-radius-attribute access-loop-
options.
Table 2 Subscriber Host Identification (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
