RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 243
95 NAS-IPv6-Address The identifying IP address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv6.
The address is determined by the routing instance through which the
RADIUS server can be reached:
“Management” — The active ipv6 address in the Boot Options File (bof
address ipv6-address)
“Base” or “VPRN” — The ipv6 address of the system interface
(configure router interface system ipv6 address ipv6-address).
The address can be overwritten with the configured ipv6-source-
address (configure aaa radius-server-policy policy-name servers
ipv6-source-address ipv6-address).
Table 72 L2TP Tunnel Accounting (Description) (Continued)
Attribute ID Attribute Name Description
Table 73 L2TP Tunnel Accounting (Limits)
Attribute ID Attribute Name Type Limits SR OS Format
1 User-Name string 253 Bytes Format depends on authentication method and
configuration.
Example: User-Name user1@domain1.com
4 NAS-IP-Address ipaddr 4 Bytes # ip-address
Example: NAS-IP-Address= 192.0.2.1
5 NAS-Port integer 4 Bytes nas-port <binary-spec> <binary-spec> = <bit-
specification> <binary-spec> <bit-
specification> = 0 | 1 | <bit-origin> <bit-origin>
= *<number-of-bits><origin> <number-of-bits>
= [1 to 32] <origin> = o (outer VLAN ID), i (inner
VLAN ID), s (slot number), m (MDA number), p
(port number or lag-id), v (ATM VPI), c (ATM
VCI)
Example : # configured nas-port
*12o*10i*3s*2m*5p for SAP 2/2/4:221.7
corresponds to 000011011101 0000000111
010 10 00100 NAS-Port = 231742788
6 Service-Type integer 2 (mandatory
value)
PPPoE and PPPoL2TP hosts only
Example: Service-Type = Framed-User
31 Calling-Station-Id string 253 chars Example:
Calling-Station-Id = "router-1 1/1/4:1200.10"
32 NAS-Identifier string 32 chars Example:NAS-Identifier = PE1-Antwerp
To Next Page
Loading...
