RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 249
40 Acct-Status-Type Indicates AA Acct request type. Acct On is sent each time a RADIUS
accounting policy (configure application-assurance radius-
accounting-policy rad-acct-plcy-name) is enabled under a partition
(configure application-assurance group aa-group-id:partition-id
statistics aa-sub radius-accounting-policy rad-acct-plcy-name) or
after a node reboot. An Acct Start is sent for each new AA-subscriber
created under a partition were radius accounting is enabled. An Acct
Interim will be sent every configured interval time (configure
application-assurance radius-accounting-policy rad-acct-plcy-
name interim-update-interval minutes) for each AA-subscriber under
a partition with the radius-accounting policy applied. An Acct Stop is
sent at AA-subscriber removal. An application-profile change or an
Application-Service-Options [ASO] override against a subscriber will
not trigger Acct Start/Stop messages and do not affect the AA RADIUS
Acct session.
44 Acct-Session-Id Unique value per node used to identify the AA subscriber accounting
session. Reported in accounting Start, Stop and Interim Updates
messages. Its value is automatically derived from the subscriber ID
string ([26-6527-11] Alc-Subsc-ID-Str) and the AA subscriber type, that
guarantees to preserve the subscriber session ID after ISA card
redundancy activity switch or after a node redundancy activity switch (in
AARP context). An activity switch will not modify the session id, but can
be detected if needed thanks to the [26-6527-156] Alc-AA-Group-
Partition-Isa-Id or the [32] NAS-Identifier. The AA RADIUS Acct session
is independent from the ESM RADIUS Acct session. An AA Acct Off is
sent when accounting stats is disabled (removing of radius-acct policy)
49 Acct-Terminate-
Cause
Indicates how the session was terminated.
55 Event-Timestamp Record the time that this event occurred on the NAS, in seconds since
January 1, 1970 00:00 UTC
26-6527-11 Alc-Subsc-ID-Str AA-subscriber string name, used together with the AA-subscriber type
to construct the [44] Acct-Session-Id. Sent in all Acct Start, Interim
Updates and Stop messages. This attribute has the same content as [1]
User-Name for AA RADIUS Accounting.
26-6527-19 Alc-Acct-I-Inprof-
Octets-64
Identify a charging group, app-group, application or sub-aggregate and
its corresponding total from-sub admitted bytes. Report cumulative
volume of preconfigured AA-subscriber charging group, app-group or
application since the start of the session (as described in RFC2689) in
Acct Interim Update or Stop messages.
Table 75 Application Assurance Accounting (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
