RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 257
40 Acct-Status-Type integer 4 1=Start, 2=Stop, 3=Interim Update,
7=Accounting-On, 8=Accounting-Off,
9=Tunnel-Start, 10=Tunnel-Stop, 11=Tunnel-
Reject, 12=Tunnel-Link-Start, 13=Tunnel-
Link-Stop, 14=Tunnel-Link-Reject, 15=Failed
41 Acct-Delay-Time integer 4294967295
seconds
Example:# initial accounting start Acct-Delay-
Time = 0# no ack and retry after 5
secondsAcct-Delay-Time = 5
44 Acct-Session-Id string 22 Bytes Example: # Acct-Session-Id =
24ADFF0000000950C5F138 Acct-Session-Id
0x3231323834363335393231303235313231
3133343039
46 Acct-Session-
Time
integer 4294967295
seconds
Example:Acct-Session-Time = 870
49 Acct-Terminate-
Cause
integer 4 Bytes Supported causes: 1=User-Request, 2=Lost-
Carrier, 3=Lost-Service, 4=Idle-Timeout,
5=Session-Timeout, 6=Admin-Reset, 8=Port-
Error, 10=NAS-Request, 15=Service-
Unavailable See also table Acct Terminate
Cause for complete overview
Example:Acct-Terminate-Cause = User-
Request
50 Acct-Multi-
Session-Id
string 22 bytes Example:Acct-Multi-Session-Id =
24ADFF0000000250C8EA5E
55 Event-
Timestamp
date 4 Bytes Example:# Jul 6 2012 17:28:23 CEST is
reported as 4FF70417Event-Timestamp =
4FF70417
87 NAS-Port-Id string 253 Bytes Ethernet SAPs: <slot>/<mda>/
<port>:<vlan>.<vlan>
Example:NAS-Port-Id = 1/1/4:50:100
95 NAS-IPv6-
Address
ipv6addr 16 Bytes # ipv6-address
Example: NAS-IPv6-Address = 2001:db8::1
26-3561-1 Agent-Circuit-Id string 247 chars Format, see also RFC 4679 # ATM/DSL
<Access-Node-Identifier><atm slot/
port:vpi.vci># Ethernet/DSL
<Access-Node-
Identifier><eth slot/port[:vlan-id]>
Example: ethernet dslam1 slot 2 port 1 vlan
100Agent-Circuit-Id = dslam1 eth 2/1:100
Table 79 Dynamic Data Service Accounting (Limits) (Continued)
Attribute ID Attribute Name Type Limits SR OS Format
To Next Page
Loading...
