RADIUS Attributes Reference
28
RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
3HE 10793 AAAB TQZZA 01 Issue: 01
26-6527-45 Alc-App-Prof-Str Application Assurance for residential, business or transit-AA subscribers
is enabled through the assignment of an application profile as part of
either enhanced subscriber management or static configuration. [26-
6527-45] Alc-App-Prof-Str is a string that maps (configure subscriber-
mgmt sub-ident-policy sub-ident-policy-name app-profile-map) to such
an application profile (configure application-assurance group aa-
group-id:partition-id policy app-profile app-profile-name). This attribute
is used in access-accept (to assign an application profile during esm host
creation) and CoA (to change the application profile of a AA-subscriber or
to create transit AA-subscriber). Strings longer than the allowed maximum
are treated as setup failures. Unreferenced strings (strings not mapping to
an application profile) will silently trigger a fallback to preconfigured
default values if allowed. If no default value is preconfigured, the
subscriber's application profile is silently disabled for esm AA-subscriber;
in case of a transit AA-subscriber creation the CoA will be rejected. The
change of an application profile to one configured under a different group/
partition or the modification of the application profile of a static AA-
subscriber is not allowed and will be treated as setup failures.
26-6527-99 Alc-Ipv6-Address The IPv6 address to be configured to the WAN side of the user
(IPoE,PPPoE) via DHCPv6 (IA-NA). Maps to DHCPv6 option IA-NA[3]
sub-option IA-Address[5] address. This attribute is an alternative to [97]
Framed-IPv6-Prefix and [100] Framed-IPv6-Pool, which also assigns
IPv6 addressing to the wan-side of a host via SLAAC or DHCPv6 IA-NA.
Attribute is also used in CoA and Disconnect Message (part of the ESM
or AA user identification-key).
For data-triggered subscriber host creation in the Enhanced Subscriber
Management (ESM) context, the attribute can be included in an Access-
Accept message to specify the IPv6 address to create a /128 IPv6 host.
For data-triggered authentication of an IPv6 UE in Distributed Subscriber
Management (DSM) context, this attribute contains the IPv6 address that
triggered the request. Inclusion of this attribute is configured under
configure aaa isa-radius-policy policy-name auth-include-attributes
ipv6-address.
For data-triggered subscriber host creation, an Access-Accept message
can contain this attribute to specify the IPv6 address to create an IPv6 /
128 host.
Table 2 Subscriber Host Identification (Description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
