RADIUS ATTRIBUTES REFERENCE GUIDE
RELEASE 14.0.R4
RADIUS Attributes Reference
Issue: 01 3HE 10793 AAAB TQZZA 01 91
26-6527-134 Alc-Subscriber-
Filter
string Max. 1 VSA. Comma separated list of strings:
Ingr-v4:<number>, Ingr-
v6:<number>,Egr-
v4:<number>,Egr-v6:<number>
where <number> can be one of:
[1 to 65535] = ignore sla-profile
filter; apply this filter-id
0 = ignore sla-profile filter; do not
assign a new filter (only allowed if
no dynamic subscriber host
specific rules are present)
-1 = No change in filter
configuration
-2 = Restore sla-profile filter
Example: Alc-Subscriber-Filter =
Ingr-v4:20,Egr-v4:101
26-6527-158 Alc-Nas-Filter-
Rule-Shared
string Multiple attributes per
RADIUS message
allowed.
The format is identical to [92] NAS-
Filter-Rule and is defined in RFC
3588 section-4.3. A single filter rule
is a string of format <action>
<direction> <protocol> from
<source> to <destination>
<options> Multiple rules should be
separated by a NUL (0x00). An Alc-
Nas-Filter-Rule-Shared attribute
may contain a partial rule, one rule,
or more than one rule. Filter rules
may be continued across attribute
boundaries.
A RADIUS message with Alc-Nas-
Filter-Rule-Shared attribute value
equal to 0x00 or “ “ (a space)
removes the shared filter entries
for that host.
See also IP Filter Attribute Details.
Example: Alc-Nas-Filter-Rule-
Shared = permit in ip from any to
10.1.1.1/32
Table 18 IP and IPv6 Filters (Limits) (Continued)
Attribute ID Attribute Name Type Limits SR OS Format
To Next Page
Loading...
