Nokia A032 User Manual

172
Nokia A032 Advanced User Guide
Transferring a key database from an access
point
If you want to retrieve the keys which are
stored on an access point, you can:
• Download directly to the WEPGen utility
using TFTP
• Read
nids.txt via a TFTP client utility
(see Using TFTP on page 103).
In the latter case the keys will be sent by the
access point in the same format as generated by
the WEPGen utility – either fully encrypted or
partly encrypted, depending on the
configuration of the access point.
Using the WEPGen utility
To transfer a key database from an access point
directly into WEPGen:
1 Make sure that you have entered the
Shared
Secret
corresponding to the access point.
2 Click the
from Access Point radio button.
3 Click
Load.
4 When prompted, confirm the
Shared Secret.
5 Enter the IP address of the access point.
6 Specify whether the fully encrypted format
is expected.
7 Click
OK.
The transfer should occur and the keys will be
displayed in the main key window from where
they can be edited or saved.
A032-Adv.book Page 172 Monday, November 13, 2000 10:47 AM

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English