Using the Web manager
55
Setting a logon script
Most ISPs don’t require you to specify a logon
script. Your ISP will tell you if you need to do
this:
To enter a line in the script:
1 Enter the Line Number (you can leave this
step out to add a line to the end of the
script).
2 Choose a
Command from the drop-down
menu.
3 Enter a suitable
Parameter value.
4 Click
Add.
To delete a line, enter its number and click
Delete.
Internet Gateway
A032-Adv.book Page 55 Monday, November 13, 2000 10:47 AM