Command line interface
81
lock Warning: Use this option with caution (see
page 46).
The unit has the option to be password locked by
issuing the command set lock on. Locking the
unit has the following results:
• The password can not be changed, even in the
configuration screen.
• The reset unit to default feature is disabled so
that the unit cannot be reconfigured even with
physical access
• The backdoor password is disabled – Nokia Tech-
nical support can normally recover a unit when
the password has been forgotten using a back-
door password.
• TFTP functions are disabled.
off
lan Controls the LAN port on the A032 hardware.
The format of the command is:
set lan
Valid values are:
10baseT (default)
off (disables the LAN interface
altogether)
10baseT
Parameter Description Default
A032-Adv.book Page 81 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
