Command line interface
93
ping Causes the Nokia A032 to issue an ICMP Echo request (PING) to a
specified IP address. The format of the command is:
ping xxx.xxx.xxx.xxx yy
where xx.xx.xx.xx is the destination IP address yy is an optional
parameter which causes the command to enter a loop and ping the
address every yy seconds.
If yy is specified the command will repeat indefinitely; type Ctrl-C
to terminate the command and return to the CMD: prompt.
restart Causes the Nokia A032 to re-initialize. This is equivalent to turning
the power off and on again. Normally this command is issued after
configuration changes. Restarting the unit can be disruptive to
currently connected users.
set See page 70.
Command Description
A032-Adv.book Page 93 Monday, November 13, 2000 10:47 AM
To Next Page
Loading...
Need help?
General
