11 (71)
Copyright © Nokia Mobile Phones 2000. All rights reserved.
When Full Screen Mode is active, before launching any commands the CBA or Menu must first be activated by
pressing the related button (Table 2).
Button pressed Visible on the screen
CBA CBA
Menu Menu + CBA
Accelerator -
Other QWERTY keys -
Table 2: The relationship between the pressed button and the visible components on the screen. The Application Area
is seen in every case.
After the activation, the Indicator Area and the Command Button Area simply slide over the contents of the
Application Area, while some of the contents in the far left and far right-hand sides of the screen are left in the
background (Figure 6).
Figure 6: The activation is made: the Indicator Area and the Command Button Area are visible on the Screen
After activating a command in the Full Screen Mode, the Application Area again occupies all the space on the screen,
i.e. if the CBA or Menu or an Indicator Area are active, they disappear from the screen.
Figure 7: Full Screen Mode.
To Next Page
Loading...
