WebUI hierarchy screens
54
User Guide
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3TG-02290-AAAA-TCZZA-02
The Network/LAN Settings/LAN and Static DHCP screen appears.
Figure 39 Network / LAN Settings
You can configure the following LAN settings:
• IPv4 address
• subnet mask
• DHCP enable / disable
• DHCP start IP address
• DHCP end IP address
• DHCP lease time
• static DHCP
Click Save Changes.
Configure a static route and bind a MAC address to a specific local LAN/IP address
by entering the MAC and IP address in the static DHCP text boxes.
Click Add.
Your values appear in the table below.
Repeat for all MAC addresses to be bound.
Note: Check the DHCP range before you change the LAN IP. If you want to use the LAN
IP, which is included in the previous DHCP range, change the DHCP range first. Click Save.
Then, change the LAN IP.
To Next Page
Loading...
