Nokia N73 - Essential Indicators

Your Nokia N73
2
Copyright © 2006 Nokia. All rights reserved.
Transfer content
1 To use the application for the first time, press ,
and select Tools > Transfer. If you have used the
application before and want to start a new transfer,
select Transfer data.
In the information view, select Continue.
2 Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
3 If you select Bluetooth connectivity:
To have Nokia N73 search for devices with Bluetooth
connectivity, select Continue. Select your other device
from the list. You are asked to enter a code on your
Nokia N73. Enter a code (1-16 digits), and select OK.
Enter the same code on the other device, and select OK.
The devices are now paired. See “Pair devices”, p. 86.
For some phone models, the Data transfer application
is sent to the other device as a message. To install Data
transfer on the other device, open the message,
and follow the instructions on the display.
If you select infrared, connect the two devices.
See “Infrared connection”, p. 87.
4 From your Nokia N73, select the content you want to
transfer from the other device.
Content is transferred from the memory of the other device
to the corresponding location in your Nokia N73.
Transferring time depends on the amount of data to be
transferred. You can cancel transferring and continue
later.
If the other device supports synchronization, you can
keep the data up-to-date in both devices. To start a
synchronization with a compatible Nokia device,
select Phones, scroll to the device, and select Options >
Synchronise. Follow the instructions on the display.
To view the log of a previous transfer, select Transfer log.
Essential indicators
The device is being used in a GSM network.
The device is being used in a UMTS network
(network service).
You have one or more unread messages in the Inbox
folder in Messaging.
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off.
The device keypad is locked.