Nokia N73 - Active Toolbar; After Taking a Picture

Camera
11
Copyright © 2006 Nokia. All rights reserved.
Active toolbar
In the camera, you can use
active toolbar as a shortcut
to select items and adjust
different settings before and
after taking a picture or
recording a video. In the
active toolbar, scroll to
different items, and select
them by pressing the scroll
key. The available options
vary depending on the capture mode and state you are in.
You can also define whether the active toolbar is always
visible on the display or activated by a key press.
If you want the active toolbar to be visible on the display
before and after taking a picture or recording a video,
select Options > Show icons.
If you want the active toolbar to be visible only a while
when you need it, select Options > Hide icons. You can
activate the active toolbar by pressing the scroll key.
Before taking a picture or recording a video, in the active
toolbar, select from the following:
to switch between the video and image modes
to select the scene
to select the flash mode
to activate the self-timer (images only). See “You in
the picture—self-timer”, p. 14.
to activate the sequence mode (images only).
See “Take pictures in a sequence”, p. 14.
to adjust the exposure compensation (images only)
to adjust white balance
to select a color effect
to adjust light sensitivity (images only)
The icons change to reflect the current status of the
setting.
The available options may vary depending on the view you
are in.
See also active toolbar options in “After taking a picture”,
p. 11, “After recording a video”, p. 16, and “Active toolbar”,
p. 11 in Gallery.
After taking a picture
After you take the picture, select the following from the
active toolbar (available only if Show captured image is
set to On in Still image camera settings):
• If you do not want to keep the image, select Delete.
• To send the image using multimedia, e-mail,
Bluetooth connectivity, or infrared, or upload it to your
online album, press the call key, or select Send.