Nokia N73 - Take Pictures in a Sequence; You in the Picture-Self-Timer

Camera
14
Copyright © 2006 Nokia. All rights reserved.
list. The settings of each scene have been set according to
a certain style or environment.
Scenes are only available in the main camera.
Use the scroll key to scroll through the active toolbar,
and select from the following options:
Video scenes
Automatic ()(default) and Night ().
Image scenes
Auto () (default), User defined (), Close-up
mode(), Portrait (), Landscape (), Sports (),
Night (), and Night portrait ().
When you take pictures, the default scene is Auto. You can
select the User defined scene as the default scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select Options >
Change. In the user defined scene you can adjust different
lighting and color settings. To copy the settings of another
scene, select Based on scene mode and the desired scene.
Take pictures in a sequence
The sequence mode is available only in the main camera.
To set the camera to take six pictures or more in a
sequence (if enough memory is available), in the active
toolbar, select Switch to sequence mode.
To take six pictures, press the capture key. To take more
than six pictures, press and hold the capture key. To stop
taking pictures, release the capture key. You can capture
up to 100 images, depending on the available memory.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press to open it.
You can also use the sequence mode with the self-timer.
When using the self-timer, the maximum number of
pictures is six.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
in the active toolbar, select Self timer > 2 seconds, 10
seconds, or 20 seconds. To activate the self-timer, select
Activate. To activate the self-timer, select Activate.
The device beeps when the timer is running. The camera
takes the picture after the selected delay elapses.