Nokia N73 - Pair Devices; Switch off Bluetooth Connectivity

Connections
86
Copyright © 2006 Nokia. All rights reserved.
Pair devices
To open the paired devices view ( ), in the Bluetooth
application main view, press .
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options > New paired device.
Devices with Bluetooth wireless technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select Options, and from the following:
Set as authorised—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings,
select Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is
removed immediately, and the connection to the
device is switched off.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity,
a tone sounds, and you are asked if you want to accept the
message. If you accept, is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received through Bluetooth connectivity are indicated by
. See “Inbox—receive messages”, p. 55.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off.