Nokia N82 - 3-D Tones

To change the profile, select a profile, and Options >
Activate. To also change the profile, press the power
key in the standby mode. Scroll to the profile you want
to activate, and select OK.
Tip: To switch between the general and silent
profiles in the standby mode, press and hold #.
To modify a profile, scroll to the profile, and select
Options > Personalise. Scroll to the setting you want
to change, and press the scroll key to open the choices.
Tones stored on a compatible memory card (if
inserted) are indicated with
.
In the tones list, select Download sounds (network
service) to open a list of bookmarks. You can select a
bookmark and start connection to a web page to
download more tones.
If you want the caller’s name to be spoken when your
device rings, select Options > Personalise, and set
Say caller's name to On. The caller’s name must be
saved in Contacts.
To create a new profile, select Options > Create
new.
3-D tones
Press , select Tools > Utilities > 3-D tones.
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect.
To modify the effect, select from the following
settings:
● Trajectory speed — Scroll left or right to adjust the
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
● Reverberation — Select the type of echo.
To listen to the ringing tone with the 3-D effect, select
Options > Play tone. If you enable the 3-D tones but
do not select any 3-D effect, stereo widening is applied
to the ringing tone.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Personalise > Ringing
volume.
© 2007 Nokia. All rights reserved.96