packet data connection to retrieve the message both
in and outside your home cellular network.
● Allow anon. msgs. — Select whether you want to
reject messages from an anonymous sender.
● Receive adverts — Define whether you want to
receive multimedia message advertisements.
● Receive report — Select whether you want the
status of the sent message to be shown in the log
(network service).
● Deny report sending — Select whether you want
to deny your device sending delivery reports of
received messages.
● Message validity — Select how long the message
centre resends your message if the first attempt
fails (network service). If the message cannot be
sent within the validity period, the message is
deleted from the message centre.
E-mail settings
Manage mailboxes
Press , and select Messaging > Options >
Settings > E-mail.
To select which mailbox you want to use to send e-
mail, select Mailbox in use and a mailbox.
To remove a mailbox and its messages from your
device, select Mailboxes, scroll to the desired mailbox,
and press C.
To create a new mailbox, in Mailboxes, select
Options > New mailbox. The name you give to the
new mailbox replaces Mailbox in the Messaging main
view. You can have up to six mailboxes.
Select Mailboxes and a mailbox to change the
connection settings, user settings, retrieval settings,
and automatic retrieval settings.
Connection settings
Press , and select Messaging > Options >
Settings > E-mail > Mailboxes, a mailbox, and
Connection settings.
To edit the settings for the e-mail you receive, select
Incoming e-mail, and from the following:
● User name — Enter your user name given to you
by your service provider.
● Password — Enter your password. If you leave this
field blank, you are prompted for the password
when you try to connect to your remote mailbox.
● Incoming mail server — Enter the IP address or
host name of the mail server that receives your e-
mail.
● Access point in use — Select an internet access
point (IAP).
See "Access points", p. 147.
© 2007 Nokia. All rights reserved.110
To Next Page
Loading...
