automatic login type for WLANs, the device
periodically scans for WLANs, which increases the
demand on battery power and reduces the battery life.
To log in manually to the internet call service, select
Login type > Manual.
To view the networks you have saved for the internet
call service and the networks detected by the internet
call service, select Saved conn. networks.
To define the service-specific settings, select Edit
service settings. This option is only available if a
service-specific software plug-in has been installed in
the device.
Log
The log stores information about the communication
history of the device. The device registers missed and
received calls only if the network supports these
functions, the device is switched on, and within the
network service area.
Recent calls
Press , and select Tools > Log.
To monitor the phone numbers of missed, received,
and dialled voice calls, select Recent calls. The device
registers missed and received calls only if the network
supports these functions, the device is switched on,
and within the network service area.
To clear all recent call lists, select Options > Clear
recent calls in the recent calls main view. To clear one
of the call registers, open the register you want to
erase, and select Options > Clear list. To clear an
individual event, open a register, scroll to the event,
and press C.
Call duration
Press , and select Tools > Log.
To monitor the approximate duration of your
incoming and outgoing calls, select Call duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code.
Packet data
Press , and select Tools > Log.
To check the amount of data sent and received during
packet data connections, select Packet data. For
© 2007 Nokia. All rights reserved.124
To Next Page
Loading...
