Default numbers and
addresses
Press , and select Contacts.
You can assign default numbers or addresses to a
contact card. In this way if a contact has several
numbers or addresses, you can easily call or send a
message to the contact to a certain number or address.
The default number is also used in voice dialling.
1. In the contacts list, select a contact.
2. Select Options > Defaults.
3. Select a default to which you want to add a number
or an address, and select Assign.
4. Select a number or an address you want to set as a
default.
The default number or address is underlined in the
contact card.
Add ringing tones for contacts
Press , and select Contacts.
To define a ringing tone for a contact or a contact
group, do the following:
1. Press the scroll key to open a contact card or go to
the groups list, and select a contact group.
2. Select Options > Ringing tone. A list of ringing
tones opens.
3. Select the ringing tone you want to use for the
individual contact or the members of the selected
group.
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
nu mber is sent with the call and your devic e recognises
it).
To remove the ringing tone, select Default tone from
the list of ringing tones.
Copy contacts
To copy names and numbers from a SIM card to your
device, press
, and select Contacts > Options >
SIM contacts > SIM directory, the names you want
to copy, and Options > Copy to Contacts.
To copy contacts to your SIM card, in Contacts, select
the names you want to copy and Options > Copy to
SIM directory, or Options > Copy > To SIM
directory. Only the contact card fields supported by
your SIM card are copied.
© 2007 Nokia. All rights reserved. 127
To Next Page
Loading...
