availability of and subscription to video call services,
contact your network service provider.
A video call can only be made between two parties.
The video call can be made to a compatible mobile
device or an ISDN client. Video calls cannot be made
while another voice, video, or data call is active.
Icons
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device.
To send a still image instead, select Tools >
Settings > Phone > Call > Image in video call.
Even if you denied video sending during a video call,
the call is still charged as a video call. Check the pricing
with your service provider.
1. To start a video call, enter the phone number in the
standby mode, or select Contacts and a contact.
2. Select Options > Call > Video call.
The secondary camera on the front is used by
default for video calls. Starting a video call may take
a while. Waiting for video image is shown. If the
call is not successful (for example, video calls are
not supported by the network, or the receiving
device is not compatible), you are asked if you want
to try a normal call or send a text or multimedia
message instead.
The video call is active when you see two video
images, and hear the sound through the
loudspeaker. The call recipient may deny video
sending (
), in which case you only hear the sound
and may see a still image or a grey background
graphic.
3. To end the video call, press the end key.
Options during a video call
To change between showing video or hearing only
sound, select Options > Enable, or Disable and the
desired option.
To zoom your image in or out, scroll up or down.
To route the audio to a compatible headset with
Bluetooth connectivity attached to your device, select
Options > Activate handsfree. To route the audio
back to the loudspeaker of your device, select
Options > Activate handset.
To adjust the volume during a video call, use the
volume key on the side of the device.
To use the main camera to send video, select
Options > Use main camera. To switch back to the
secondary camera, select Options > Use secondary
camera.
© 2007 Nokia. All rights reserved.118
To Next Page
Loading...
Need help?
General
Weight and Dimensions
