Nokia N95 - Barcode Reader

Barcode reader
Press , and select Applications > Bureau >
Code-barres.
Use the Barcode reader application to decode
different types of codes (such as codes in
magazines). The codes may contain information
such as URL links, e-mail addresses, and phone
numbers.
1. To scan a code, select Lire le code.
2. Set the code to fit the display.
The application attempts to scan and decode the
code, and the decoded information appears on
the display.
When viewing the decoded information, the
different links, URL links, phone numbers, and e-
mail addresses are indicated by icons on the top
of the display in the direction they appear in the
decoded information.
3. To save the scanned data, select Options >
Enreg..
The data is saved in .bcr format in the Données
enreg. folder.
To select the memory where the information is
saved, select Options > Paramètres >
Mémoire utilisée.
4. To use the decoded information, select
Options and the desired action.
The device reverts to the standby mode to save
battery power if the barcode reader cannot be
activated or if no keys are pressed for 1 minute.
161
Dossier Bureau