CC Technical Documentation Troubleshooting - RF
RM-11
Issue 2 09/2005 ©2005 Nokia Corporation Confidential Page 11
• Automatic Gain Control for Transmitter (Tx AGC):
Consists of the Tx IF AGC, the Tx RF AGC, and the PA AGC. Used as control lines to
adjust the transmitter output levels. Monitor the Tx power with a call box or
analyzer. Use in Local Mode only.
• Automatic Gain Control for Receiver (Rx AGC):
Consists of the Rx IF AGC. Used as a control line to adjust the receiver input level.
Use in Local Mode only.
To Next Page
Loading...
