CC Technical Documentation Troubleshooting - RF
RM-11
Issue 2 09/2005 ©2005 Nokia Corporation Confidential Page 45
Tx Troubleshooting Using Phoenix
1. Use the Phone Control dialog box to turn on the mobile terminal.
2. Click the
Phone State tab.
3. Click
Local in the State Selectors list, and click Execute. This change the state
to Local Mode.
4. Use the
RF Main Mode dialog box to set:
•Band
• Channel
• Rx/Tx mode
Note: Be sure the “Main Mode set successfully” message appears.
5. Open the DSP menu, and click CDMA Control.
PCS Band
Cell Band
To Next Page
Loading...
