24Copyright © 2005 Nokia. All rights reserved.
■ Install the electromagnetic interference filters (for RC-2
and RC-4)
To check the type number of your radio, remove the battery. The type number (RC-
2, RC-3, or RC-4) is printed on the white label inside your radio. When charging an
RC-2 or RC-4 radio with the charger ACP-8, ACP-9, or ACP-12, you need to use
two electromagnetic interference filters. Two filters are supplied in the sales
package, and they are also available as separate accessories.
Install the filters to the charger’s power cord before you connect the charger to
the radio or an AC wall outlet.
1. The filters should be placed on the power cord one after the other, within 15
cm (6 inches) of the charger. Place the power cord inside the opened filter, and
then wrap it in one loop around the filter.
2. Close the filters around the power cord.
To Next Page
Loading...
