50Copyright © 2005 Nokia. All rights reserved.
Scanning settings
1. Select Menu→Talk groups→Group settings→Scanning.
2. To switch scanning on, scroll to On, and press OK. To switch scanning off, scroll
to Off, and press OK.
You can also quickly activate and deactivate scanning in the fast menu. See Fast
menu on page 42. is displayed when scanning is on.
To set the groups you want to scan, press in the standby mode to access the
list of talk groups in the selected folder. Scroll to the desired group, and select
Options→ Include to include the group in scanning, or Exclude to exclude the
group from scanning. You can also set scanned groups in the menu. See Edit group
folders on page 54.
PTT key settings
You may set the PTT key to function in either of the following ways:
• Pressing and holding the PTT key always makes a call to the selected group,
even if the radio has just received a call from a scanned group and the name of
the scanned group is still on the display.
• Pressing and holding the PTT key makes a call to the talk group whose name is
on the display. If the radio has just received a call from a scanned group and
the name of the scanned group is still on the display, the call is made to that
scanned group. If there have been no calls from scanned groups and the name
of the selected group is on the display, the call is made to the selected group.
To set the function of the PTT key, see Push-to-talk setting on page 102.
To Next Page
Loading...
