88Copyright © 2005 Nokia. All rights reserved.
Unit alert messages
The unit alert network service is a type of status message. It is used to alert people
to the following radio traffic. If you receive a unit alert message, pay special
attention to the following calls and messages.
The text of the unit alert message is predefined by your organisation. When you
receive a unit alert message, the message is displayed, the radio plays an alarm
tone, the lights flash, and the General profile is activated. To stop the alarm, press
Stop.
A unit alert message is sent like a status message.
Send status messages
Tip: To send a status message, press in the standby mode.
Tip: To send a status message in the standby mode, enter the status
number, and select Options→ Send as a status→Status or Situation.
Tip: You can set the radio to send status messages when you press the duty
key . To send a callback request to the address of the selected group,
press and hold the duty key in the standby mode. To send a situation
indicator, enter the situation number in the standby mode, and press and
hold the duty key. See Duty key setting on page 102.
Send status messages or callback requests
1. Select Menu→Status msgs.→Send status message.
To Next Page
Loading...
