GATEWAY QUICK START GUIDE
Nomadix Inc. 8
Step 1d: PPPoE Static IP Client Configuration
Use the same steps for configuring dynamic PPPoE shown in Figure 6 above, but select static for PPP IP Configuration Mode, and
enter your IP address for PPP Static IP Address. A summary page similar to Figure 7 above will be displayed.
If everything is correct in the summary, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location
information.
Otherwise, select an option from the Ethernet port configuration menu to display or make changes to the WAN port settings. When
finished with the settings, type b[ack] to return to the previous menu and proceed to Step 2 to enter the location information.
Step 2: Entering Your Location Information
You will be required to enter location information to obtain the license key. Enter the following mandatory location information
details shown in Figure 8.
Figure 8: Site location details
Step 3: Retrieving Your License Key
The system will now prompt you to accept or decline the End User License Agreement (EULA). You must accept the terms of the
EULA before the AG can retrieve its license key. To retrieve the license key, enter y[es] as shown in Figure 9. The AG retrieves
the license key from the Nomadix license key server, then reboots.
To Next Page
Loading...
