GATEWAY QUICK START GUIDE
Nomadix Inc. 4
Note: The WAN port of the Gateway must be connected to a live network that can access the Internet in order to retrieve the
license key from the license key server.
Initial (startup) Configuration
Log in to the Gateway, by opening an SSH to 172.30.30.172 or the asynchronous comm port, using the default Login= admin and
password= admin. Type y[es] when prompted to configure settings.
The initial minimal WAN port configuration mode will be displayed as shown in Figure 1.
Figure 1: Initial minimal WAN port configuration.
Select the desired configuration mode and use the following steps to configure the WAN port for either Static IP, DHCP client or
PPPoE.
To Next Page
Loading...
