ACCESS GATEWAY
System Administration 195
PMS billing for a port is enabled only if PMS Services is globally enabled AND the
per-port enable PMS billing parameter is set.
Facebook authentication for a port is enabled only if Port-Based Policies is enabled
and that port allows Facebook as an authentication type.
9. Click on the Add button to save your changes (the message: Entry added or updated in
the location file
appears), or click on the Reset button if you want to reset all the values
to their previous state.
Updating a Port-Location Assignment
The procedure for updating a port-location assignment is similar to adding a port-location
assignment. The difference between the two procedures is how they are presented to you. For
example, if you already have port-locations assigned and you enter an existing “port” value,
each data field that you go through (port, location, state, and description) displays the value
currently assigned to the field.
To update a Port-Location assignment, simply update the fields with new values.
Exporting Port-Location Assignments {Export}
This procedure shows you how to export your current port-location assignments to the
“location.txt” file. The location.txt file is stored in: /flash/location.txt (resident in the Access
Gateway’s flash memory).
If you have updated a port-location assignment, you may want to change its
description to distinguish from the old assignment. Although the old assignment
will no longer exist in the system, a meaningful description can often be a
valuable quick reference guide.
Exporting your current port-location assignments to the Access Gateway’s flash
memory will overwrite the existing location.txt file.
To Next Page
Loading...
