Nomadix AG5600 - Selected Detailed Descriptions

ACCESS GATEWAY
320 Quick Reference Guide
 Acct-Session-Time (Stop)
 Terminate-Cause (Stop)
 NAS ID
 NAS-IP Address
 NAS-Port-Type
 NAS-Port
 Framed-IP Address
 Acct-Delay-Time
 Called-Station-ID
 Calling-Station-ID
 MaxBytesTotal
 MaxGigawordsTotal
Selected Detailed Descriptions
Acct-Session-ID
The Acct-Session-ID is created when the RADIUS authentication request is built. It is
transmitted in both the Access-Request and the Accounting-Request.
Session Timeout
There is currently no default session timeout that you can set in the Access Gateway Web
Management Interface (WMI). If the Radius server does not send a Session-Timeout, the
Access Gateway will set the subscriber expiration time to 0, which means access forever.
Log-Off-URL
Allows for the placement of a log off URL (for example, 1.1.1.1) on an external portal page.
MaxBytesTotal
Number of total bytes, to support volume-based billing for total of upstream and downstream
traffic. Note that MaxBytesTotal will reset to zero at 4 gigabytes. Use with
MaxGigawordsTotal if volume of data may exceed 4 gigabytes.