NORBIT iWBMS - Page 12

10.4.3 User Manual Contents April 17, 2020
Firmware: 5.2.1 Page 12 of 142
WBMS
Firmware &
GUI
Versions
Ensure that both firmware and GUI versions
match and are latest.
Prior to each new survey. Contact
NORBIT support for details.
Integrated
INS
Firmware &
GUI Version
Ensure that both firmware and GUI versions
match and are latest. This may require an
annual maintenance cost.
Prior to each new survey. At least once
each year. Contact NORBIT support for
details.
After Each Survey
Component
Inspection
Additional Notes
Complete Kit
Perform all inspections in the previous section.
Ensures that users are ready
for the next survey.
Wet-End
The complete wet end should be rinsed with fresh
water. Clean off any marine growth with soft rag. If
barnacles have taken refuge on the sonar, then
remove these very carefully so as not to pit or nick the
polyurethane. If any damage occurs to the anodized
aluminum or polyurethane, then take a high-resolution
picture and send to NORBIT support for help.
Allow the kit to dry before locking down the lid. Once
back at the office, store with lid open.
Ensure that the kit is ready to
provide long lasting operation.
Monthly
Component
Inspection
Additional Notes
Complete Kit
Perform all inspections in the previous sections.
Ensures that users are ready
for the next survey.
Sound Speed
Probe
Compare surface sound speed probe with another
sensor. If it is not within 1m/s difference and the
comparison conditions are similar, then determine
which sensor is bad and return for calibration.
The surface sound speed
sensor should provide reliable
data for an 18-24-month
period.
Annually
Component
Inspection
Additional Notes
Complete Kit
Perform all inspections in the previous sections.
Ensures that users are ready
for the next survey.
INS Annual
Warranty
The integrated INS require its own annual maintenance.
The latest INS firmware versions necessitate an active
maintenance warranty that must be kept up to date and
without lapse. Please contact NORBIT support prior to
any INS FW update.
Applanix releases important
performance updates via
NORBIT tested and approved
firmware version. Contact
NORBIT for more information.
Biennially
Component
Inspection
Additional Notes
Complete Kit
Perform all inspections in the previous sections.
Ensures that users are ready
for the next survey.
WBMS
Calibration
Services
Long term use requires preventative maintenance and
calibration service for the sonar. It is recommended to
send purchased system once every two years for a
calibration service. The first bathymetric WBMS systems
are still in operation as they have been cared for and
returned to the factory for increased longevity.
Calibration service includes
surface sound speed
calibration.