Nord Drivesystems SK 750E-751-323-A - Operation and Display; Menu Structure of the ParameterBox

4.4 Functions of the ParameterBox
BU 0750 GB Technical design subject to change 63
Menu structure of the ParameterBox
The menus are arranged on different levels each of which has an annular configuration. To go from one level
to the next, users will have to press the ENTER key ( ). Pressing the SELECTION keys ( and )
simultaneously will return control to the preceding level.
Parameter 1
management
P1201 2
Copy - source
P1202 2
Copy - Destination
P1204 2
Load default values
P1203 2
Copy - start
P1205 2
Clear memory
P0 2
Backward
Parameterisation
Display 1
P1001 2
Bus scan
P1002 2
FI selection
P1004 2
Values to display
P1003 2
Display mode
P1005 2
Scaling factor
P0 2
Backward
Options 1
P1301 2
Language
P1302 2
Operation mode
P1304 2
Contrast
P1303 2
Auto bus scan
P1305 2
Set password
P1306 2
Box password
P0
zurück
750E 11,0kW/3 POS STD
1
Fi/Hz
U/V
I/A
45.0
360
3.4
ONLINE
FU
P1
R Running
U1
U2
U3
U4
U5
1
-
-
-
-
OK
-
-
-
-
100
P1307 2
Reset box param.
P0 2
Backward
P0
zurück
P1308 2
NORDAC p-box
Version 3.4 R1
Basic parameters 2
>ENTER< (to 3
rd
level)
P0 2
Backward
Inverter menu structure,
varies with the added-on
features
(e.g. Posicon, ...)
 Sect. 5 Parameterisat.
Motor data 2
>ENTER< (to 3rd level)
Op. value display 2
>ENTER< (to 3
rd
level)
IMPORTANT
The parameters of the menu groups >Display< (P10xx), >Parameter management< (P12xx) and
>Options< (P13xx) of the 1
st
level are autonomous ParameterBox parameters. There is no direct rela-
tion between them and the inverter parameters.
The <Parameterisation< menu provides access to the inverter menu structure. The spe-
cific characteristics of this structure depend on which components are added to the inverter,
such as customer units (SK CU1-…) and/or special extensions (SK XU1-…). The descrip-
tion of the parameterisation procedure begins in Section 5.