13
8. Insert the Upright Wire (81) into the bottom of
the right handrail assembly (D) and out of the
end as shown.
Attach the right handrail assembly (D) to the
Right Upright (90) with two 5/16" x 2 1/2" Screws
(28) and two 5/16" Star Washers (11). Make
sure not to pinch the Upright Wire (81). Do
not fully tighten the Screws yet.
Then, remove and discard the indicated
screw (C).
28
11
D
90
81
8
C
9. Tighten four #8 x 3/4" Screws (2) into the left and
right handrail asssemblies (B, D) and into the
Left and Right Uprights (89, 90).
9
D
B
89
90
2
2
To Next Page
Loading...
