NordicTrack C3 Si Bike User Manual

20
THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor provides hands-free
o
peration and continuously monitors your heart rate
during your workouts. To purchase the optional
c
hest pulse sensor, see the front cover of this
manual.
INSTALLING THE RECEIVER FOR THE OPTIONAL
CHEST PULSE SENSOR
I
f you purchase the optional chest pulse sensor, follow
the steps below to install the receiver included with the
c
hest pulse sensor.
1. See assembly step 6 on page 8 and remove the
console from the upright.
2. Connect the wire on the receiver (A) to the wire in
the Console (4). Hold the receiver so that the
antenna is oriented as shown and is facing the
Console. Attach the receiver to the plastic posts
on the back of the Console with the two included
small screws.
3. See assembly step 6 on page 8 and reattach the
console to the upright.
Note: Any other wires that are included with the
chest pulse sensor may be discarded.
A
4
Antenna
Wire
Posts
Small
Screws

NordicTrack C3 Si Bike Specifications

General

Resistance Type	Magnetic
Resistance Levels	22
Weight Capacity	250 lbs
Seat Adjustment	Vertical and Horizontal
Type	Upright
Handlebar Adjustment	Yes
Drive System	Belt
Warranty	10-Year Frame, 2-Year Parts, 1-Year Labor