NordicTrack E 7.2 Elliptical User Manual

10
9
8
8. Identify the Right Upper Body Arm (61) and ori-
ent it as shown.
Slide the Right Upper Body Arm (61) onto the
Right Upper Body Leg (60).
Attach the Right Upper Body Arm (61) with two
M8 x 38mm Bolts (96) and two M8 Locknuts
(102). Make sure that the Locknuts are in the
hexagonal holes.
Repeat this step for the Left Upper Body
Arm (47).
Hexagonal
Holes
60
61
7
4
47
63
110
120
96
9. Untie and discard the wire tie on the Upper
Wire (110).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Upper Wire (110), to the Pulse
Sensor Wires (63), and to the Extension
Wire (120).
Insert the excess wire into the Upright (4) or into
the Console (7).
102

NordicTrack E 7.2 Elliptical Specifications

General

Brand	NordicTrack
Model	E 7.2 Elliptical
Category	Elliptical Trainer
Language	English