NordicTrack E 9.0 Elliptical - Page 13

13
17
16. Untie and discard the wire tie on the Main Wire
(110).
While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (110) and to the Right
and Left Sensor Wires (63, 69).
Insert the excess wire into the Upright (4) or into
the Console (7).
16
7
17. Tip: Avoid pinching the wires. Attach the
Console (7) to the Upright (4) with four #8 x 1/2"
Screws (124).
18
Avoid pinching
the wires
124
124
4
18. Orient the Rear Upright Cover (80) as shown.
Attach the Rear Upright Cover (80) to the Upright
(4) with four #8 x 3/4" Screws (123).
80
123
123
4
4
110
63, 69
7