16
 HOW TO PLUG IN THE POWER CORD
This product must be grounded. If it should mal-
function or break down, grounding provides a path of 
least resistance for electric current to reduce the risk 
of electric shock. This product’s power cord has an 
equipment-grounding conductor and a grounding plug. 
Plug the power cord into an appropriate outlet that 
is properly installed and grounded in accordance 
with all local codes and ordinances. This product is 
for use on a nominal 120-volt circuit. IMPORTANT: 
The elliptical is not compatible with GFCI-equipped 
outlets and may not be compatible with AFCI-
equipped outlets.
A temporary adapter may be used to connect the 
power cord 
to a 2-pole 
receptacle as 
shown at the 
right if a prop-
erly grounded 
outlet is not 
available. 
The tempo-
rary adapter 
should be 
used only until 
a properly grounded outlet can be installed by a quali-
fied electrician. 
The green-colored rigid ear, lug, or the like extending 
from the adapter must be connected to a permanent 
ground such as a properly grounded outlet box cover. 
Whenever the adapter is used, it must be held in place 
by a metal screw. Some 2-pole receptacle outlet box 
covers are not grounded. Contact a qualified electrician 
to determine if the outlet box cover is grounded before 
using an adapter.
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving 
it requires two persons. Stand in front of the elliptical, 
hold the upright, and place one foot against one of the 
front wheels. Pull on the upright and have a second 
person lift the handle on the ramp until the elliptical will 
roll on the front wheels. Carefully move the elliptical to 
the desired location, and then lower it to the floor.
HOW TO USE THE ELLIPTICAL
Place 
your foot 
here
Pull on the 
upright
Lift here
    DANGER: Improper connection 
of the equipment-grounding conductor can 
result in an increased risk of electric shock. 
Check with a qualified electrician or service-
man if you are in doubt as to whether the 
product is properly grounded. Do not modify 
the plug provided with the product—if it will 
not fit the outlet, have a proper outlet installed 
by a qualified electrician.
Grounded Outlet Box
Adapter
Power Cord
Lug
Metal Screw