NordicTrack FUSION CST PRO User Manual

7
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M10 x 73mm Screw (143)–4
M10 x 93mm Screw (102)–8
M10 x 98mm Screw (140)–4
M10 x 30mm
Screw (100)–2
M10 x 25mm Hex
Screw (101)–8
M10 x 35mm
Screw (95)–4

NordicTrack FUSION CST PRO Specifications

General

Brand	NordicTrack
Model	FUSION CST PRO
Category	Fitness Equipment
Language	English