13
68
D
E
15
59
A
B
40
HOW TO USE THE TABLET HOLDER
IMPORTANT: The Tablet Holder (68) is designed
for use with most full-size tablets. Do not place
any other electronic device or object in the
Tablet Holder.
The magnetic Tablet Holder (68) can be attached at
any height on the Mirror (59).
Orient the Tablet Holder (68) so that the slot (A) is
facing upward and the padded side (B) is facing the
Mirror (59). IMPORTANT: Always hold the Tablet
Holder in the horizontal position when attaching
it to the Mirror. Do not attach the Tablet Holder to
any other part of the strength system except the
Mirror.
Attach the Tablet Holder (68) to the Mirror (59) at the
desired height. Make sure that the Tablet Holder is
level and centered on the Mirror.
Set the Tablet (40) in the Tablet Holder (68). Reverse
these actions to remove the Tablet and the Tablet
Holder.
HOW TO USE THE CHARGING PORT
The strength system features a charging port that
you can use to charge the Tablet (40) while you
exercise.
To use the charging port, plug a USB charging cable
(not included) into the charging port (C) on the left
side of the strength system and into the receptacle
on the Tablet (40); make sure that the USB charg-
ing cable is fully plugged in.
HOW TO USE THE TABLET STAND
IMPORTANT: The Tablet Stand (15) is designed
for use with most full-size tablets. Do not place
any other electronic device or object in the
Tablet Stand.
To insert a tablet into the Tablet Stand (15), lift the
slide (D) upward, and then set the tablet in the tray
(E). Then, pull the slide downward over the top
edge of the tablet. Make sure that the tablet is
firmly secured in the Tablet Stand. Reverse these
actions to remove the tablet from the Tablet Stand.
C
To Next Page
Loading...
