Do you have a question about the NordicTrack Gx 2.7 Bike and is the answer not in the manual?
Resistance Type | Magnetic |
---|---|
Display Type | LCD |
Workout Programs | 20 |
Display Features | Time, Speed, Distance, Calories |
Heart Rate Monitoring | Grip Sensor |
Secure the rear stabilizer to the exercise bike frame with screws.
Secure the front stabilizer to the exercise bike frame with screws.
Install seat post and knob, then adjust seat post height for comfort.
Attach the upright assembly and secure the main wire harness.
Attach shield cover, console cover, and handlebar assembly.
Connect wire harnesses to console and attach handlebar knob.
Attach pedals to crank arms and plug in power adapter.
Connect power adapter to bike and a suitable electrical outlet.
Adjust seat height for proper knee bend at lowest pedal position.
Adjust seat forward or backward for optimal riding comfort.
Loosen knob, rotate handlebar to desired angle, then tighten.
Operate the bike in manual mode, manually adjusting resistance.
Measure heart rate accurately using handgrip sensors.
Steps to adjust the reed switch for accurate console feedback.
Procedure to adjust drive belt when pedals slip during use.