To Next PageTo Next Page
Why does my NordicTrack T 12.2 Treadmill power turn off during use?
If your NordicTrack Treadmill turns off during use, it might be due to the switch tripping. Wait five minutes, then press the switch back in. Ensure the power cord is securely plugged in. If the issue persists, unplug the treadmill, wait five minutes, and plug it back in. Also, try removing and reinserting the key from the console.
What to do if my NordicTrack T 12.2 Treadmill power does not turn on?
If your NordicTrack Treadmill power does not turn on, ensure the power cord is plugged into a surge suppressor, and the surge suppressor is plugged into a properly grounded outlet. Also, verify that the key is inserted into the console. If it still doesn't turn on, the switch may have tripped; wait five minutes, then press the switch back in to reset it.
How to fix NordicTrack T 12.2 walking belt slipping?
If the walking belt on your NordicTrack Treadmill slips when walked on, use the hex key to turn both idler roller screws clockwise, 1/4 of a turn.
What to do if NordicTrack T 12.2 console displays remain lit?
If the console displays on your NordicTrack Treadmill remain lit even after you remove the key, the demo mode may be turned on. To turn off the demo mode, hold down the Stop button for a few seconds.
How to center the walking belt on my NordicTrack Treadmill?
If the walking belt on your NordicTrack Treadmill is not centered between the foot rails: - If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. - If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn.
What to do if my NordicTrack T 12.2 Treadmill displays do not function properly?
If the displays of the console on your NordicTrack Treadmill do not function properly, remove the key from the console and unplug the power cord. Also, ensure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If the walking belt is overtightened, use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn.
How to fix incline on NordicTrack Treadmill?
To correct the incline on your NordicTrack Treadmill, hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button.
General| Incline | 12% |
|---|---|
| Speed | 0 - 12 mph |
| iFit Compatibility | Yes |
| Folding | Yes |
| Bluetooth | Yes |
| Cooling Fan | Yes |
