24
HOW TO USE THE STEREO SOUND SYSTEM
This treadmill has been
designed specically to
work with iPod and has
been certied by the
developer to meet Apple
performance standards. To
play music or audio books
through the console’s stereo
speakers, you must connect
your iPod, MP3 player, CD player, or other personal
audio player to the console through the audio jack or
through the optional SYNC. The SYNC will charge your
iPod while you use it.
To use the MP3 jack, locate the included audio wire
and plug it into the MP3 jack on the top of the con-
sole. Then plug the audio wire into a jack on your MP3
player, CD player, or other personal audio player.
Make sure that the audio wire is fully plugged in.
To use the SYNC, plug a compatible iPod (not
included) into the cable extending from the SYNC.
Make sure that the iPod is fully plugged in.
Next, press the Play button on your iPod, MP3 player,
CD player, or other personal audio player. Adjust the
volume on your personal audio player or press the
Volume increase and decrease buttons on the console.
If you are using a personal CD player and the CD
skips, set the CD player on the oor or another at sur-
face and not on the console.
HOW TO USE A SYNC
The optional SYNC enables you to record your tread-
mill workout results on your iPod
®
(not included). You
can then upload your results to Nikeplus.com, where
you can use an array of tools to analyze your results
and monitor your progress toward your tness goals.
To purchase a SYNC at any time, call the telephone
number on the front cover of this manual.
To use the SYNC, you must have an iPod nano
®
(4th
or 5th generation) or an iPod touch
®
(2nd, 3rd, or 4th
generation). You must also have access to a computer
with an internet connection.
For more information about the SYNC, see the instruc-
tions included with the SYNC.
Decrease
Increase
To Next Page
Loading...
Need help?
General
