10
6. Remove the tie from the 5/16" Cage Nut (90). If
necessary, press the Cage Nut back into place.
Attach the Right Handrail (72) to the Right
Upright (76) with a 5/16" x 1" Bolt (7), a 5/16"
Star Washer (8), and two 5/16" x 1" Flat Head
Screws (10) as shown. Start the Bolt and the
Flat Head Screws, but do not tighten them
yet.
6
7
90
8
76
10
72
7. Set the Console Base (83) face down on a soft
surface to avoid scratching the Console Base.
Remove and discard the two screws (C) from the
Pulse Crossbar (31). Then, remove the Pulse
Crossbar.
4
83
31
C
C
7
To Next Page
Loading...
