NordicTrack T 6.5 S User Manual

8
3. Lay the Right Upright (90) near the Base (6).
Press the Grommet (77) into the square hole (B)
in the Right Upright. Make sure not to pinch
the ground wire (C).
If there is a screw (D) preattached to the Right
Upright (90), remove and discard it.
Then, attach the ground wire (C) to the Right
Upright (90) with a #8 x 1/2" Silver Screw (10).
6
90
10
90
A
2
81
77
C
B
D
2. Make sure that the power cord is unplugged.
Remove the tie securing the Upright Wire (81) to
the front of the Base (6).
Next, identify the Right Upright (90). Have a
second person hold the Right Upright near the
Base (6).
See the inset drawing. Tie the wire tie (A) in
the Right Upright (90) securely around the end
of the Upright Wire (81). Then, insert the Upright
Wire into the lower end of the Right Upright and
pull the upper end of the wire tie until the Upright
Wire is routed through the Right Upright.
6
81
90
81
A
3

NordicTrack T 6.5 S Specifications

General

Motor	2.6 CHP
Speed Range	0-10 MPH
Incline Range	0-10%
Running Surface	20" x 55"
Weight Capacity	300 lbs
Workout Programs	20
Foldable	Yes
iFit Compatible	Yes
Built-in Speakers	Yes
Cooling Fan	Yes
Display	5" Backlit
Heart Rate Monitoring	EKG Grip Pulse
Folding Design	SpaceSaver Design