8
2. Identify the Left Upright (75). Have a second
person hold the Left Upright near the Base (80).
See the inset drawing. Tie the wire tie in the
Left Upright (75) securely around the end of the
Upright Wire (70). Then, insert the Upright Wire
into the lower end of the Left Upright as you pull
the other end of the wire tie through the Left
Upright.
2
70
75
75
Wire
Tie
70
Wire
Tie
3. With the help of a second person, hold the Left
Upright (75) against the Base (80). Be careful
not to pinch the wires.
Partially tighten three 3/8" x 4" Screws (4) with
three 3/8" Star Washers (5) into the Left Upright
(75) and the Base (80); do not fully tighten the
Screws yet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the right
side.
75
3
5
4
80
Wires
80
To Next Page
Loading...
Need help?
General
