EasyManuals Logo

NordicTrack T7si NTL07908.3 User Manual

NordicTrack T7si NTL07908.3
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
3. 3
Identify the Right Upright (112), which is marked
with a sticker. Have a second person hold the
Right Upright near the Base (85) as shown.
See the inset drawing. Tie the wire tie in the
Right Upright (112) securely around the end of
the Wire Harness (79), Then, pull the other end
of the wire tie until the Wire Harness is routed
completely through the Right Upright.
Wire
Tie
112
85
.
Have a second person hold the Right Upright
(112) against the Base (85), with the bend in the
Right Upright positioned as shown. Be careful
not to pinch the Wire Harness (79).
Attach the Right Upright (112) to the Base (85)
with two 3/8" x 2 3/8" Bolts (10) and two 3/8"
Star Washers (18). Do not fully tighten the
Bolts yet.
112
85
8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NordicTrack T7si NTL07908.3 and is the answer not in the manual?

NordicTrack T7si NTL07908.3 Specifications

General IconGeneral
BrandNordicTrack
ModelT7si NTL07908.3
CategoryTreadmill
LanguageEnglish

Related product manuals